Synido Live 100 FAQs

Technical Support

If you have any other questions, you can contact cs@synido.com for more help.

FAQs - Instructions

🔍 Click This to View More Guides

SY002 sound card firmware upgrade steps are as follows:

  1. Connect the SY001 sound card to the computer through a USB cable.
  2. Open File【MV_BP10xx_PC_Tools_V2.2.11_20210518】, double-clicking to execute the upgrade software (MV_AP82xx_BP10xx_PC_Tools_V2.2.11) in this file.
  3. The penal is as follows, the lower left corner will show that the USB is connected, if it does not show that the USB is connected, please replace the USB cable or USB interface
  4. Import the upgrade file, click the “Import Upgrade File” button, a dialog box will appear, and then choose to upgrade the firmware(Upgrade Start)

Concrete steps to Upgrade it.

  1. Click Import Upgrade File
  2. Select the file (SY001-20220419V14-53BF-(Synido voice 100) KEY A1-B2-C3-D4.MVA) in the pop-up, choose open.
  3. Then the penal will display the name of the firmware file.
  4. Click the Upgrade Start Button
  5. Wait for the upgrade to complete, and the penal will display Upgrade Succeed. 
  6. (After upgrading one sound card, if you have another sound card needs to be upgrade, just plug it in and wait for the panel to show that the USB is connected, and then click to start the upgrade.)
  7. Firmware upgrade installation package: https://drive.google.com/drive/folders/1suwBKOAvrGAZJ0xh-fj3w_6vPftElHPR

🔍 Click This to View More Guide

Synido Live 100 FAQs

1. About the 4 microphone jacks on the audio interface

There are 4 mic jacks in the audio interface, can I use 4 mics all at the same time? Is there a way that there can be a separate volume control for each mic? There is only one mic volume knob. Is this the only volume control for all the mics?

-You can use 4 mics all at the same time; The microphone sounds of the 4 channels are mixed together; Overall volume control via mic vol botton

 

2. How can I use this device without any effects being applied to my voice? I’m either in reverb or electro…

— You can use the DRY button, which allows you to keep the original sound (the first button in the REVERB column)

 

3.How do you make those 3 customize buttons do anything?

— Long press the CUSTOMIZE button, and you can define the BGM with the microphone, recording audio or accompaniment recording, the ELECTRO lights synchronously, display the recording time, and the maximum duration is 15 seconds, Release button. Recording complete.（You can record any sound you want, such as sponsored sounds）

Customize 1/2/3 BGM button can be recorded repeatedly by long press, overwriting the original audio

 

4.” Music Vol” seems to control how loud my computer’s output over USB to the Live 100 is. This input can then be dodged with the dodge button. However, the Windows music volume doesn’t change and there’s no way to get the PC output back into the live 100 microphone output on my PC?

“Music Vol”   will control the volume of the computer output to LIVE100, PC output to PC need to open LOOPBACK at the same time the REC VOL keeping open otherwise will not be recorded back to the computer

 

5. What does the control panel do?

Control panel can set the dodge/denoise/vocal cut level, these can not be setted in hardware devices